Abstract：The curing rate and emission rate of fluoride and the change of clinker quality after cooperative treatment of electrolytic aluminum overhaul slag in cement kiln were studied. The results showed that the curing rate of fluoride in raw materials increased with the increase of the mixing ratio, which means that the amount of fluoride dissolved in clinker increased, and the fluoride maintained dynamic balance in the kiln system. As the disposal ratio of overhaul slag increased in the cement kiln, the initial setting time and final setting time of the clinker are both extended, the 3d compressive strength of the clinker is decreasing, but the 28d compressive strength is increasing.
吴向松, 王勇飞, 张仕博. 水泥窑协同处置电解铝大修渣氟化物固化率的研究[J]. 水泥杂志, 2024, 0(03): 27-.
LIAN Chao, et al.. Influence and control of co-processing solid waste and salt production from fly ash with cement kiln on system working condition. Journal of Cement, 2024, 0(03): 27-.
2024, Vol. 0 
